CONCRETE POLISHING SAN JOSE
Why Polished Concrete Beats Traditional Flooring
Most Bay‑Area buildings already sit on a concrete slab. Polishing that slab unlocks a hard‑wearing, dust‑free, high‑gloss surface—without adding costly materials.
Heavenly Touch Stone Care has delivered 700+ polished concrete floors in San Jose, Santa Clara, and Silicon Valley for warehouses, showrooms, offices, and high‑end homes.
Key Advantages at a Glance
Durability – withstands forklifts & high foot traffic
Low Maintenance – no wax, no finish stripping
Design Flexibility – matte, satin, or mirror gloss; dyes & aggregate exposure
Eco‑Friendly – no additional flooring waste, low VOC
Cost Savings – one‑time install vs. ongoing tile/coat replacements
5‑Step Concrete Polishing Process
-
Surface Prep & Crack Repair – diamond grinding, patching, and joint fill.
-
Metal‑Bond Grinding – opens surface, exposes aggregate as desired.
-
Chemical Densifier – hardens slab & seals micro‑pores.
-
Resin‑Bond Polishing – successive grits (100–3,000) to reach target sheen.
-
Optional Guard/Sealer – boosts stain resistance & reflectivity.
Most 2,000 sq ft slabs completed in 2 days with minimal dust thanks to HEPA extraction.
Finish & Design Options
-
Matte (400 grit) – low‑sheen, industrial chic.
-
Satin (800 grit) – popular in retail & offices.
-
High‑Gloss (1,500–3,000 grit) – showroom‑level reflectivity.
-
Exposed Aggregate – terrazzo look at a fraction of cost.
-
Stains & Dyes – unlimited color palette for zoning or branding.
See real projects in our photo gallery.
Joint & Spall Repair Services
-
Joint Re‑cut & Fill – epoxy or polyurea for clean, sealed contraction joints.
-
Spall Patch – rebuild broken edges with rapid‑set mortar.
-
Surface Leveling – eliminate trip hazards and puddling.
FREE on‑site consultation – we inspect moisture, surface hardness, and usage profile before recommending a polish level.
Polished Concrete vs. Alternative Floors
Polished Concrete
-
Life span: 15–20 yrs
-
Upkeep: Dust mop, damp mop
-
Slip Safety: Meets OSHA slip‑resistance (dry coefficient ≥ 0.5)
Epoxy Floor
-
Life span: 8–12 yrs
-
Upkeep: Sweep & mop; recoat needed
Tile
-
Life span: 10 yrs with grout reseal
-
Upkeep: Scrub grout lines, replace cracked tiles
Need chemical‑proof performance? Check our epoxy floor coatings instead.
San Jose, Morgan Hill, Gilroy, San Martin, Santa Cruz, Los Gatos, Monte Sereno, Saratoga, Cupertino, Sunnyvale, Santa Clara, Mt. View, Los Altos, Los Altos Hills, Palo Alto, Menlo Park, Atherton, Portola Valley, Woodside, Fremont, and Pleasanton
Frequently Asked Questions
How long does the polishing process take? 2–3 days for a typical 2‑car garage; larger slabs vary by square footage.
Is polished concrete slippery? Dry coefficient meets OSHA standards; we can add traction guard in wet zones.
Can you polish old or cracked concrete? Yes—most slabs are repairable with our crack & spall patch system.
What about color options? We offer water‑based dyes in 24 standard shades or custom blends.
Does polishing increase dust in the air? No—densifier locks surface; our HEPA grinders capture 99 % of dust during work.
Request a Free Concrete Polishing Estimate
Ready to transform dull gray into a brilliant, low‑maintenance showpiece?
Call (408) 497‑4354 or contact us online.
Want a more creative look to your concrete?
Check out our epoxy floor coatings page
Your concrete hasn’t shined until it’s had the Heavenly Touch.
